Installing the control panel assembly – Dell PowerVault DL2000 User Manual
Page 123
Advertising
Installing System Components
123
Figure 3-27.
Control Panel Removal
Installing the Control Panel Assembly
1 Insert the display module into the chassis cutout and secure with the two
Torx screws.
2 Affix the display module label to the display module.
3 Install the control panel board in the system chassis and secure with the
three Phillips screws. See Figure 3-27.
4 Connect the display module cable to the control panel board. See
Figure 3-27.
1
display module label
2
display module securing screws (2)
3
display module
4
display module cable
5
control panel cable
6
control panel circuit board
7
control-panel circuit board
securing screws (3)
5
6
2
7
1
3
4
Book.book Page 123 Monday, September 14, 2009 12:57 PM
Advertising