Dell PowerVault DL2000 - Manual (Page 71)

Installing System Components
71
3 Install the hot-plug hard drive.
a Open the handle on the hard-drive carrier.
Figure 3-4. Installing a Hot-Plug Hard Drive
b Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c Close the handle to lock the drive in place.
4 Replace the front bezel, if it was removed in step 1.
1 hard drive 2 drive carrier
3 drive carrier release handle
3
1
2
Book.book Page 71 Monday, September 14, 2009 12:57 PM