Dell PowerVault DL2000 - Manual (Page 80)

80
Installing System Components
Cooling Shroud
The cooling shroud produces and directs airflow over the system memory modules.
CAUTION:
The DIMMs are hot to the touch for some time after the system has
been powered down. Allow the DIMMs to cool before handling them.
NOTICE:
Never operate your system with the memory cooling shroud removed.
Overheating of the system can develop quickly resulting in a shutdown of the
system and the loss of data.
Removing the Cooling Shroud
1 The cooling shroud is secured with a latch at the end of the shroud. Release
the latch by pulling it towards the outside wall of the chassis. See Figure 3-9.
2 Rotate the shroud upward and toward the front of the system on its hinges,
and then lift the shroud out of the system.
Figure 3-9. Removing and Installing the Cooling Shroud
1 shroud pivots (2) 2 cooling shroud
3 release latch 4 shroud hinges (2)
5 fan bracket
1
3
4
2
5
Book.book Page 80 Monday, September 14, 2009 12:57 PM