AVer IWH5000 series - Manual (Page 110)

102
 Using RTSP protocol: If the IP camera supports RTSP protocol, user can select
RTSP protocol to connect with IP camera.
- Protocol: Select the “RTSP_RTP” from drop-down list.
- Model: Please check user’s manual or vendor of IP camera.
- Video Format: select format of video.
- Channel: Select the channel that is going to be display on the surveillance
monitor.
- IP Camera Site: Enter the RTSP URL and Port for connection. Please check
user’s manual or vendor of IP camera to get RTSP URL and port. Different IP
camera has different RTSP URL and port. The example of RTSP URL is
“rtsp://10.1.1.2/video.sdp”.
 Using ONVIF protocol: User can connect IP camera through ONVIF protocol if IP
camera has support ONVIF and can be recognized by DVR system.
- Protocol: Select the ONVIF from drop-down list.
- Model: Don ’ t need to select it.
- Video Format: The video format is basic on IP camera setting, so select Auto.
- Channel: Select the channel that is going to be display on the surveillance
monitor.
- IP Camera Site: Enter the ONVIF address of IP camera and Port for connection.
Please check user’s manual or vendor of IP camera
- Auto Search: User also can click Auto Search button to find all IP camera that
can be detected by DVR system on your LAN network. In Search Result window,
click the IP camera that wants to connect with it.
 URL: Enter the URL of IP camera. If you are not sure URL of IP camera, please refer
to the IP camera manual or contact your IP camera local distributor.
2. After enter IP camera ’s related data, if it requires user identification, enable
Authentication check box and enter ID and Password.
3. To enable audio, click Enable Audio check box.