AVer IWH5000 series - Manual (Page 160)

152
5.9.11 Missing, Suspicious Object, and Scene Change
Detected
- Missing Object
Select the certain object on the screen for the system to detect; when the object is disappear
or move and the system will alarm. Click OK to exit and save the configuration. To exam the
setup condition, click Start Test.
1. Select the camera number (0-16) and press RIGHT button on the mouse to call up the
setup windows.
2. Click Save to capture the image for comparing reference first. To view the captured image,
enable the Show Reference Image check box. The captured image will display on screen.
The reference image is sharing with the Suspicious Object and Scene Change function.
3. Mark the Enable check box to setup the condition.
4. Use the mouse to click and drag the frame on the screen. User can drag more than one
frame.
5. Sensitivity: Set the system detects sensitivity.
6. Delay Time: Set the lasting time for system to detect the object.
7. To reset all object frames, click Clean. To clean an object frame, click right button of
mouse and drag the object frame that user want to clean.
- Suspicious Object
Suspicious Object is including the object missing or the doubtful object appears on the screen.
Click OK to save and exit the setup windows. To exam the setup condition, click Start Test.
1. Select the camera number (0-16) and press right button on the mouse to call up the setup
windows. And then, click the Suspicious Object Tab.
2. Click Save to capture the image for comparing reference. To view the captured image,
enable the Show Reference Image check box. The captured image will display on screen.
The reference image is sharing with the Missing Object and Scene Change function.