AVer IWH5000 series - Manual (Page 82)

74
- Resequence channels when autoscan
The DVR system will re-arrange the channels order if some of channel is disable when auto
scan is enabled. For example, CH 1 and 3 is disable, the channel will display in order of
CH2,4,5,6,7~16. The CH1 and 3 won’t be shown on screen when auto scan is enabled.
- Remember playback display mode
To memorize the last playback status. The DVR system will memorize the playback status
from last time that user has selected or setup for next time playback.
- Enhance IP camera performance in TV out
Mark to improve the IP camera video preview smoother on TV output.
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches
to the next video in cycle depending on the set time gap.
- Temperature Display
Select the format of temperature -- °C or °F
- Playback Mode
Select the mode of playback the video.
 Select date and time: Select the date and time which user wants to playback.
 Play the last file: Automatically playback the video from the last hour
 Instant Playback: Automatically playback the video which has just recorded. To set the
instant playback time period, fill in the time in second at
Set Instant Playback’s Play
Time column.
- Date Format
Select the date format which wants to display in Select date and time playback mode
(10) Dual Monitor
Mark to enable the Playback UI and Emap UI to display on 2
nd
monitor (monitor 2). In default, DVR
system only display on one monitor (monitor 1) but the dual output is available.
i
To disable the dual monitor function when only has connected one monitor. Otherwise,
the Playback UI won’t be able to display on main monitor screen (monitor 1).
(11) POS
Set from which camera screen to display the data from the POS equipment. Click Setting, to set
the POS Console Setting. (see also Chapter 5.1.1 )