User setting, Chapter 5.10 user, Setting – AVer IWH5000 series User Manual
Page 163: 10 user setting
Advertising
155
5.10
User Setting
Only users with Administrator privileges can access User Setting. In the User Setting dialog box,
click Add to insert a new user, Delete to remove the selected user, Edit to modify the user control
right, OK to exit and accept the setting, and Cancel to exit without saving the setting.
After clicking Add or Edit, you may customize the user control setting. OK to exit and accept the
setting, and Cancel to exit without saving the setting
(1) Authorization level
Select the status of the user. Only Administrator-level can access User Setting, and reset the
Alarm status when using the Remote Console.
(2) Control Right
Enable the items that would allow the user to access.
Advertising