AVer IWH5000 series - Manual (Page 81)

73
- Default user
Automatically log in to the selected default user when the DVR system is executed.
(9) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.
- Status Report
Send a daily system event and attention analysis report. To change the e-mail settings, click
Setup.
- Beep if no signal
Make sound when the video signal is lost.
- Mandatory Record
Always record video when software is running.
- Enable Liveplayback
To allow instantly live playback while recording in preview mode (see also (19)Live playback in
Chapter 4.1 ).
- Screen Saver
Set a period time to enter screen saver mode when system idle.
- Leave the system without asking user name and password
Don’t need to enter password when close/exit DVR program.