AVer IWH5000 series User Manual
Page 143
![background image](/manuals/634470/143/background.png)
135
3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Click
Schedule to select the time and date that you want to activate or deactivate the alarm function.
Select Enable or Disable and click the block that user want to activate or deactivate the alarm
function.
4. In (3) Conditions
, you can set “Trigger if any” to activate if it falls to one of the conditions or
“Trigger if all” to activate if it falls to all conditions.
-
Motion Detected: select and click on the camera number to set the condition for the
system to alarm. Right click on the camera number to setup the Continuous trigger
duration of Motion detected. Enter the time period for system to send out the alarm when
motion has continuous detected for a period.