AVer IWH5000 series User Manual
Page 62
54
Name
Function
(15) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second. (See also
).
(16) Find Next
Search for the next event or changes in the motion detector frame. You
can use this when you are using Intelligent Search or Event Search
function.
(17) Event Search
Search from the recorded activities that take place in the system (i.e.,
Sensor, Motion, Video Loss, POS). (See also
).
(18) Intelligent
Search
Search the changes in the motion detector frame (See also
).
(19) Audio
Enable/disable audio sound.
(20) Watermark
To verify the playback video has not been modified
To verify the playback
video doesn’t been modified. Click
to check
the video. Watermark verification window will show up as following:
i
Watermark verification doesn’t support the video that is
recorded from MPEG IP camera.
(21) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
(22) Turbo
To improve the smoothness of live video. Turbo button is disabled（
）
in default. When turbo buttonis enabled or disabled that applys to whole
DVR system, not the specific channel. When restart or shutdown DVR
system, the current turbo status won’t be saved by DVR system