AVer IWH5000 series - Manual (Page 30)

22
Network Setting Wizard
Setup the IP address of DVR and configure the DDNS. After completed all configuration, click
Next to save the setting and go to next wizard setting.
1. LAN1/LAN2: Select IP address mode -- DHCP or Static IP.
i
After setup LAN1, click Next will go to LAN2 setup page.
 DHCP: To use DHCP server assigning DVR server an IP address.
 Static IP: Assign a fixed IP address for DVR server
- IP ADDRESS: Assign a constant IP address which a real IP addresses give from ISP
to DVR system.
i Do Not assign the DVR to 1.0.0.0 network segment. It will cause the DVR cannot
access to Internet due to the un-recognize to 1.0.0.0 IP segment.
- Mask: It is a bitmask used to identify the sub network and how many bits provide room
for host addresses. Enter the subnet mask of the IP address which user has assigned
to DVR system.
The green light
indicates the LAN
port is connected
with Ethernet cable.
The red light
indicates the LAN
port doesn
’t have
Ethernet connection.