AVer IWH5000 series - Manual (Page 117)

109
5.2.2 To Setup the FaceFinder
To setup the human face detection and capturing from live video for security issue. Click Detail to
enter the FaceFinder setup window. To set the value back to default, click Default button.
i
- The face detection angle is around 30 ~ 45 degrees for both side of face and 25 ~ 30
degrees for look up and down side of face.
- It is to recommend that user install the camera in the position of light comes in for
better face detection result.
Save Data into Object index: Mark to enable face detecting and capturing face image to
display on face object log. The default is enabled when the FaceFinder is enabled.
Advanced Search(Include Human Eye Detection): Beside face recognition, the system will
also focus the detection on eyes of face.
Search Region: User can select condition of face detection and setup face detects area.
- Detect Motion Object: Only when the human face is moved, the system will detect and
the face will be captured.
- Define Select Region: Setup the face detects area. The system will only detect the face
in the selected area. On the preview screen, use mouse to drag the area that user wants
to search. User should see the blue frame on the preview screen of FaceFinder setup
window. User can select multiple areas for detection. To clear the selected area, right click
the mouse button and drag the selected area to clear. Or, click Clear to clear all selected
areas.
Detection Sensitivity: To set the sensitivity level of face detection. More higher is more
easily to detect the difference of the face.
Minimal Face Size Level: To set the face detection of minimal size. The system will only
detect the face size is equal or bigger than the minimal face size. User should see a green
frame on the preview screen of FaceFinder setup window.