AVer IWH5000 series - Manual (Page 146)

138

Recording is switched off: when the recording has been stopped, the system will
send out the alarm message.

Network is switched off: when the network connection of DVR system is lost, the
system will send out the alarm message.

Hard Disk failed: when the hard disk
can’t work normally, the system will send out the
alarm message.

FAN Failed: when the fan speed is slow down and DVR temperature is over 50
°
C, the
system will send out the alarm message.

S.M.A.R.T.: select the risk level (High or Low) that base on the DVR system
’s
S.M.A.R.T. mechanism to detect the hard disk ’s status and the system will send out
the alarm message when the status has matched the selected risk level.

Temperature: set a temperature limited of system for system to alarm. When DVR
system temperature is over the temperature limited, the system will send out the
alarm.

Illegal Entry: any objects move between selected regions which user has set up in
Object Counting section (see Chapter 5.2.1 ), the system will send out the alarm.
Select the entry (object moves from region 1 to 2 or from region 2 to 1) and click the
Detail to select the camera and the times for system alarm.
 Trigger if once: Send out the alarm when the selected camera match the illegal
entry has selected.
 Trigger if the amount exceeds: Send out the alarm when the selected camera
and illegal entry times match the illegal entry has selected.
i
Only the camera has been setup in Object Counting will be available for
selecting in Illegal Entry.

FaceFinder: Enable to send out the alarm when the selected channel has detected
face.
i
Only the camera has setup FaceFinder detection will be available for
selecting.