AVer IWH5000 series - Manual (Page 125)

117
5.3 Recording Setting
In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
i
Some of functions don’t support for IP camera channel.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable
the ALL check box. To select more than one camera, Right click on the camera icon. To select
one camera only, Left click on the camera icon. The camera icon turns red when it is selected.
The camera icon will be different that depends on the camera type.
IP camera/Remote DVR icon Analog camera icon
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block
represent the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a
week, select the recording mode and click the  button.
If you want to only record at a particular time or day, click Schedule button and select the