To setup alarm relay, Chapter 5.9.1, Chapter 5.9.2) – AVer IWH5000 series User Manual
Page 151: 1 to setup alarm relay
Advertising
143
5.9.1
To Setup Alarm Relay
1. Next to the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available relay list and in the ON column, set to
enable/disable the relay operation when the alarm is activated.
3. In the Retrieve time check box, you may enable/disable to extend the relay operation time and
set the duration in second.
4. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
Advertising