AVer IWH5000 series - Manual (Page 77)

69
Chapter 5 Customizing the DVR System
In the Preview/Advanced screen mode, click button to customize your DVR. When the
DVR configuration setup selection appears, select and click the buttons you want to change the
setting.
User can re-do the Setup Wizard by clicking Setup Wizard bar.
5.1 System Setting
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one
hour data, the system automatically replaces the oldest data. In case you have more than one
storage path, the system automatically saves the data to the next storage path. You may also add
additional network-attached storage (NAS) for extremely high storage capacity(see also Map