AVer IWH5000 series User Manual
Page 188
![background image](/manuals/634470/188/background.png)
180
Record Setting
Analog Camera
In the Recording setup window, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory settings.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable
the ALL check box. To select more than one camera, Right click on the camera icon. To select
one camera only, Left click on the camera icon. The camera icon turns red when it is selected.
(2) Recording Mode
The blocks from 00 to 23 represent the time in 24-hour clock. To record in full 24 hours, select the
recording mode and click the button. If you want to only record at a particular time, click the
Schedule button and click colored block, then click on the time blocks in Recording Mode window.
When the system starts recording a red triangle mark would appear at the upper left corner of the
screen.