AVer IWH5000 series - Manual (Page 169)

161
6.1.2 To Search Using the Visual Search
1. Click Visual Search.
2. In the Visual Search Setting dialog box, select the Camera number and the date. Then click
OK.
3. When a series of frames appear by date, click on the frame to display another series of frames
and search by every Hour of that date, every Minute of that hour, every 10 Seconds of that
minute, every Second of that 10 seconds. To go back, click . To view from the
selected frame and close event search, click .
6.1.3 To Search Using the Event Search
1. Click on the video screen on where you want to search.
2. Click Event Search. The Event Search text (red) would appear at the lower left corner of the
screen.
3. In the Event Search Setting dialog box, check the type of condition you want to search. If you
select POS, in the Find Text box, type the word. Then, click OK to start searching. The video
search would stop at the frame that matches the condition. To keep on searching click Find
Next ( ) button.
4. You may also set to search and list all the result. Just check the Output Event List box. In the
Search Duration section, set the Begin Time and End Time. Set the Searching Interval time
for in a period of time won’t list out the same events. Then, click OK to start searching.
5. When the Event list appear, click and select the item you want to view.
6.1.4 To Search Using the Intelligent Search
1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner
of the screen.
3. When the Intelligent Search Setting dialog box and motion detector frame appear, you may
adjust the sensitivity bar and the motion detector frame size and location. To set motion
detector frame size and location, left click and drag on the screen. Then, click OK to start
searching. The video search would stop at the frame that matches the condition. To keep on
searching click Find Next ( ) button.
4. You may also set to search and list all the result. Just check the List box. In the Search
Duration section, set the Begin Time and End Time. Set the Searching Interval time for in a
period of time won’t list out the same events. Then, click OK to start searching.