AVer IWH5000 series - Manual (Page 127)

119
To adjust motion detect sensitive, scroll the Sensitivity 1/2/3 bar. Click OK to save and exit the
setting window. To reset all setting, click Default.
(5) Voice Detection
Adjust the intensity of the audio detector. The system detects sound when it exceeds the intensity
value.
(6) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses more hard
disk space.
(7) Frame Rate
Set the maximum and minimum number of frames to be recorded during motion and motionless
state. The frame rate ranges from 1 to 30 for NTSC and 1 to 25 for PAL. The higher the frame rate,
it uses more hard disk space.
(8) Video Size
Select the size of the video and click the  button. The higher the size, the larger the file it create.
You can also activate the Enable Deinterlace to enhance the video quality. Set the Enable
Deinterlace mode to #1, if you are capturing motionless picture and #2, if it captures lots of
movement.
Click Region button to select
the motion detect area.