AVer IWH5000 series - Manual (Page 44)

36
Name Function
(1) Exit
- About: Display current DVR program version. User also can
update the DVR program firmware.
- Compact: Switch to compact mode
- Guest: Switch to the guest mode. In guest mode, the
functions are limited to preview and playback function only.
For complete functions of DVR, please login as an
administrator authority level.
- Cancel: To exit Logout dialog box
(2) Split Screen Mode
It provides 7 kinds of split display modes for your selection. You
can select one of the split display modes by clicking the following
icon.
i
- The 16CH DVR doesn ’t support 32-split screen mode.
- If there are only 4 cameras, you won’t be able to switch to 9, 13, and 16 split
screen mode.
- The DVR system will save the current operating mode status (split screen mode,
auto scan, and compact mode status) when shutdown DVR application and apply
the mode for next login.
- When you are in single screen mode, Right click and Drag a square on the area
you want to enlarge.
- When you are in multiple-screen mode, Right click the video screen of the
camera and Drag on where you want to relocate it.
- To only display one of the video in the multiple-screen mode, Left click on the
video screen you only want to display.
(3) Record
To start recording. The button turns violet when it is recording.
Click it again and enter the password to stop.
(4) EMap To load up to 8 desired Emaps in BMP or JPG image format, and
locate cameras, sensors, and relays to desired positions (see
also Chapter 4.5 ).
(5) Network
To allow inbound connections. When this function is enabled,
the button turns violet. Click it again to disable all inbound
connections.
(6) Setup
When setting up the system for the first time, type the login
password in the Password text box to access. The default ID is
admin and password is admin.
Click Setup ( ) button to configure settings for cameras,
recording, network, scheduler, backup, sensors, relays, alarms
and user authentication.
(7) PTZ To call out a PTZ setup dialog to configure an appointed PTZ
camera (see also Chapter 4.4 ).