AVer IWH5000 series User Manual
Page 145
Advertising
137
-
IP Camera Sensor: Click IP Camera Sensor
to configure IP camera’s sensor condition.
To set the sensor condition for the system to alarm, click High or Low column. The column
with a circle means is selected.
-
Continue trigger duration: Set a time period that when sensor has been trigger and stay
in the same status for that period, then the alarm will be sent out.
-
Abnormal Event: Enable/disable to set the condition of the event for system to alarm.
System Reboot: when the DVR system reboot without abnormal condition, the
system will send out the alarm message.
Abnormal Reboot: when the DVR system reboot in irregular condition, the system
will send out the alarm message.
Advertising