AVer MOB1304-NET - Manual (Page 11)

5
5. Connect the power connector to the hard disk. And
then, put the hard disk inside the hard disk drawer
carefully. Please watch out the SATA cable when
put the hard disk into the hard disk drawer.
6. Using the both hand to hold and turn the hard disk
drawer over carefully. And then, adjust the hard disk
to appropriate position and secure the hard disk with
4 screws on the hard disk drawer.
7. Slide the hard disk drawer back into DVR unit. 8. Using key to lock the hard disk key lock
9. You may now connect all the devices, cables, and power. When the power is connected, the Power LED light
turns on