AVer MOB1304-NET User Manual
Page 29
Advertising
![background image](/manuals/634474/29/background.png)
23
By enabling TIME STAMP function, current date and time could be displayed on each channel
screen to verify the recording date and time. Please follow the below steps to enable TIME
STAMP.
1. Press
to call out OSD menu.
2. Using
¡¡
and
¡¡
move the highlight to CAMERA/REC and press
to make a
selection.
3. Select GENERAL and press
to make a selection.
4. And then, select TIME STAMP by pressing
button.
5. Using
¡¡
and
¡¡
to select the disable/enable of TIME STAMP and press
or
to confirm.
6. Press
to exit from OSD menu.
7. The current date and time will display on upper right corner of each channel screen.
DVR System current date and time
Advertising