AVer MOB1304-NET - Manual (Page 85)

79
more hard disk space.
- Quality
Select the video quality setting from BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW.
Choosing higher quality allows user to record less hours but the quality of the recorded
video is better.
- FPS(alarm)
Set the number of frames per second to be recorded when alarm has occurred. The
higher the frame rate, it uses more hard disk space.
- QUALITY(alarm)
Select the video quality (BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW) of alarm
recording. Choosing higher quality allows user to record less hours but the quality of the
recorded video is better.
(3) Record Schedule
By default, in 24 hours, the recording schedule is set to always record every hour. Refer to the
table below to customize the recoding condition.
Condition Description
ALWAYS RECORD Record non-stop
ALARM RECORD
Start recording when the alarm is activated. The alarm activates status according to
the setting in ALARM SETTING.
SMART RECORD
Automatically switch to recorded at the frame rate of FPS(alarm) once an alarm is
detected and if there is no motion, it records at the frame rate of FPS.
The Frame rate setting refers to CHANNEL SETTING.
VARIED RECORD
When each channel has different record schedule, the record schedule table will
display in Green color that is indicated as VARIED RECORD.
Select the channel to setup record schedule. Click the type of schedule and select hour (00~23)
and click OK to complete the schedule setting.