AVer MOB1304-NET - Manual (Page 68)

62
Name Function
(16) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.
(17) Watermark
- When playback *.dvr file, click watermark button to verify the correction of
playback video.
- When playback file from hard disk and *.avf file, click watermark to call out
ImageVerification application. (see also
Chapter 6 )
4.3.1 To Cut and Save the Portion of the Recorded Video
1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause
on where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause
on where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation, click Segment button again.
3. Click Output button to save the wanted portion.
4. In the Save As dialog box, locate on where user wants to save the file, type the filename,
and select the video format.