AVer MOB1304-NET - Manual (Page 33)

27
2.4.2 Enabling the GPS Function
GPS must be enabled in order to receive the GPS data. Following the below steps to enable the
GPS function on the MOB DVR.
1. Press
or use mouse right-click on the screen to call out the OSD menu.
2. Select the Miscellaneous from Main menu.
MAIN MENU
CAMERA/REC
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
NETWORK
SYSTEM
MISCELLANEOUS
3. Select GPS from Miscellaneous menu.
MISCELLANEOUS SETUP
MUTLIPLE DVR
GPS
GSM
3G
ENTERTAINMENT
4. Enable the data that user wants to receive and select unit of the distance (KM or Mile). To
enable the selection, press and use ¡¡ and ¡¡ to mark and un-mark the selection.
To confirm the selection, press . User also can use mouse click the selection and use the
roller button to make a selection.
LATITUDE
LONGITUDE
DISPLAY MESSAGE
HEADING
SPEED OVER GROUND
KM / MILE
KM
GPS SETUP
LATITUDE
LONGITUDE
DISPLAY MESSAGE
HEADING
SPEED OVER GROUND
KM / MILE
KM
GPS SETUP
5. Press or use mouse left-click on the screen to exit from OSD menu. The GPS
configuration is completed.