3 familiarizing the remote console buttons, Familiarizing the remote console buttons – AVer MOB1304-NET User Manual
Page 92
86
8.3
Familiarizing the Remote Console Buttons
i
Right-click on the screen can enable GPS function (see also
) if the remote MOB DVR
server has installed the GPS device and enabled the GPS function.
Name
Function
(1) Exit
Close/minimize remote console application
(2) Split Screen Mode
Select from 2 different split screen type to playback the recorded video file of all the
cameras or one camera on the screen.
(3) Record
Start/stop video recording.
(4) Network
Enable/disable remote system access. This feature allows you to access DVR
server from a remote location via internet connection.
(5) Setup
Configure the Remote Console setting. (see also
(6) PTZ
To call out PTZ control panel for controlling PTZ camera.
(7) Preview
Switch to Preview/Playback mode. This allows you to view live camera display.
(8) Playback
Switch to Playback mode. This allows you to view the recorded video file. (see also
(9) Status Bar
Display the current date, time and hard disk free space.
(10) Camera ID
Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(11) Snapshot
Capture and save the screen shot either in *.jpg or *.bmp format.
(12) Auto Scan
Enable/disable channel auto cycle switch.
(13) Full screen
Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
(14) Audio
Enable/disable the sound display
(15) DirectDraw
Enhance the video quality.
i
Direct Draw function supports for certain VGA card. For more information, please contact your VGA card
vendor.