AVer MOB1304-NET - Manual (Page 31)

25
4. And then, select SEARCH AREA to mark an area to search.
Use the ¡¡ , ¡¡ , ¡¡ , and
¡¡
to move the block and
press to confirm. To exit, press .
5. To start searching, select the SEARCH EXECUTION.
6. When the playback file is found, the DVR system will start
playback automatically.
SEARCH AREA SETUP SCREEN
Listed below are the symbols of recording condition that will display on surveillance screen while playback mode
and record mode:
A – Always Recording
It records non-stop and automatically continue recording when interrupted.
L – Alarm Recording
It records when the alarm has activated.
B – Button Recording
It records when the REC record button is pressed.
N – NO Recording
It doesn‟t record at all
The “” play symbol would appear beside the channel number when you are in playback mode.