AVer MOB1304-NET - Manual (Page 48)

42
OSD MENU Description
PTZ SETUP
ID
ENABLE
PROTOCOL
BAUD RATE
CH1 CH2 CH3 CH4
AUTO PAN
DWELL TIME
010S 010S 010S 010S
OFF OFF OFF OFF
9600
CANON VC - 4CR
001 002 003 004
PTZ SETUP
To enable PTZ camera control by remote control and setup PTZ
camera parameters.
ENABLE
Select the channel of PTZ camera. If the PTZ camera is connecting
on channel 1, then select the camera 1 for PTZ video to be display on
channel 1.
ID
Assign an ID to PTZ camera. The ID range is from 000 to 255 but is
limiting by protocol of PTZ camera. Please refer to your PTZ camera
user
‟s manual for more detail of PTZ ID assignment.
i
We suggest assigning PTZ camera ID star from 5 to avoid
conflict with ID of camera channels.
PROTOCOL
Select the protocol of PTZ camera. The protocol will be different that
depends on the brand of PTZ camera. The DVR system currently
supports 3 protocols ─ PELCO-D, PELCO-P, and CANON
VC-C4R. Please refer to your PTZ camera user manual to make sure
which protocol is using for.
BAUD RATE
To setup the baud rate of PTZ camera. For more detail, please refer
to your PTZ camera
‟s user manual.
AUTO PAN
Select the preset number to assign an auto move direction for the
PTZ camera. For example: 1-4 means the PTZ camera will auto
move from preset position 1, 2, 3 to 4.
DWELL TIME
Set a time that how long the PTZ camera stays in that position before
it moves to the next one.
MAIN MENU
CAMERA/REC
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
NETWORK
SYSTEM
MISCELLANEOUS
DISPLAY
Configure the parameters of video and setting of spot monitor.
DISPLAY SETUP
COLOR ADJUSTMENT
VIDEO SHIELD
VGA - TV SELECTION
VIDEO OUT SETTING
SPOT MONITOR
EVENT DURATION
AUTO SCAN
CH1
MAIN - MAIN
QUAD
010 SEC