Configure acuitylink clinician notifier software – Welch Allyn Connectivity Server - User Manual User Manual
Page 60
56
Manage the AcuityLink option
Welch Allyn Connectivity Server
Configure AcuityLink Clinician Notifier software
In the Configure Notification page, you can configure these software settings, unit by unit
or for all units at once:
•
Login controls and logout controls for the Clinician Notifier program
•
Patient alarm notification on mobile devices running the Clinician Notifier program
•
Delivery of specific patient alarm types to mobile devices running Clinician Notifier
•
Alarm history retention by the Clinician Notifier program
Open the Configure Notification page and select a unit
To open the Configure Notification page and select a unit
1.
Along the top of any WACS page, click Home. Click WACS Administrator, and then
click the Clinician Notifier Manager tab.
The AcuityLink Clinician Notifier Manager Overview page appears.
2.
Along the left side of the page, click Configure Notification.
The Configure Notification page appears.
3.
Click the Unit pull-down menu, and then select the unit for which you are configuring
Clinician Notifier.
*
represents “All units.”