Welch Allyn Connectivity Server - User Manual - Manual (Page 82)

78 Troubleshooting Welch Allyn Connectivity Server
To install the Clinician Notifier program
1. In the Install Status page, tap Install.
2. If the device resets, take these steps:
a. Restart the Clinician Notifier software.
b. Tap in your facility’s IP address for the hospital side of the WACS server, and then
tap Test.
c. Tap OK.
d. Tap Save.
e. Tap Proceed.
3. Repeat Step 1 and Step 2 until all files are installed.
A Run Status page appears.