Document Outline

• Introduction
• Safety Precautions
  • Be Sure to Use this Product Correctly
• UL/CE Certification
• Package Contents
• Organization of this Manual
• Table of Contents
• How to Read this Manual
  • Page Layout
  • Terms
  • Symbols
• Chapter 1 N-410 Overview
  • 1-1 What You Can Do with the N-410
  • 1-2 System Configuration
  • 1-3 Part Names
• Chapter 2 Installation
  • 2-1 Making Settings and Connections
  • 2-2 N-410 Connections and Wiring
    • Installing and Wiring the Input and Output Jacks
    • RS-232C Connections
  • 2-3 Connecting and Wiring to the N-R4 Series
    • Connecting to BL-1300 Series/SR Series/RF Series Devices
    • Connecting the Power Supply
    • I/O Terminal Layout and Wiring
  • 2-4 NX-50RS Connections and Wiring
  • 2-5 N-48 Connections and Wiring
    • Connecting to a BL/SR/RF Series Device
    • Installing and Wiring the Input and Output Jacks
    • Wiring an RS-485
  • 2-6 BL-U1 Connections and Wiring
    • Electrical Wiring
    • Connecting to a BL/SR/RF Series Device
    • BL-U1 Dipswitch Settings
    • Installing and Wiring the Input and Output Jacks
    • Wiring an RS-485
  • 2-7 How to Use the Connection Confirmation Test
  • 2-8 Installation
    • Installation Notes
    • Installing an N-410
    • Installing an NX-50RS
    • Installing an N-48
    • Installing a BL-U1
    • Installing the N-R4
• Chapter 3 N-410 Settings
  • 3-1 Making Settings
  • 3-2 Sending and Receiving Settings
  • 3-3 Using Terminal and Test Mode
• Chapter 4 Controlling Multi-drop Link Mode
  • 4-1 Multi-drop Link Mode
    • Controlling Multi-drop Link Mode
    • Settings
  • 4-2 Multi-drop Link Mode Data Communication
    • Auto-polling
    • Manual Polling
    • Setting Auto-polling/Manual polling
    • Send Buffer Capacity
• Chapter 5 Controlling Multi-head Mode
  • 5-1 Multi-head Mode
    • Controlling Multi-head Mode
    • Settings
  • 5-2 Operating in Multi-head Mode
    • Trigger Notification Method
    • Read Mode
    • Data Transmission Timing
    • Trigger Input Settings
  • 5-3 Sending Data in Multi-head Mode
    • Communication Format
    • Error Code Settings
  • 5-4 Sending Commands in Multi-head Mode
    • Sending Commands to BL/SR/RF Series Devices
    • N-410 Direct Control Commands and Setting Commands
• Chapter 6 Serial Communication
  • 6-1 Serial Communication Outline
    • Type of Serial Communication
    • Serial Communication Setup
  • 6-2 Details of Data Communication
    • Communication Protocol
    • Send Buffer Capacity of the N-410 Series
    • Communication Format
  • 6-3 Command Communication with BL/SR/RF Series Devices
    • Command Communication Format
  • 6-4 Direct Control Command of the N-410 Series
    • Procedure for Command Communication
    • Command Communication Format
    • Details of Direct Control Commands
  • 6-5 Setting Commands for the N-410 Series
    • Setting Command Communication Procedure
    • Command communication format
    • Setting Command
• Chapter 7 PLC Link
  • 7-1 PLC Link
    • Compatible PLCs
    • Usable Devices
  • 7-2 Device Assignments
    • Device Assignments for Multi-drop Link Mode
    • Device Assignments in Multi-head Mode
  • 7-3 Settings
    • BL Series and SR Series Settings (When Using an NR-4/N-48/BL-U1)
    • BL Series and SR Series Settings (When Using an NX-50RS)
    • N-410 Settings
    • KV Series Settings
    • Mitsubishi MELSEC Series Settings
    • Omron SYSMAC Series Settings
  • 7-4 PLC Link Errors
• Appendices
  • 1 Specifications
  • 2 External Dimensions
  • 3 Troubleshooting
  • 4 Main Device Display
  • 5 ASCII Code Table
  • 6 Calculating Checksums
  • 7 Setting Item List
  • 8 Factory Default Settings
  • 9 Index