Digilent 6003-410-000P-KIT - Manual (Page 72)

72 www.xilinx.com XUP Virtex-II Pro Development System
1-800-255-7778 UG069 (v1.0) March 8, 2005
Appendix A: Configuring the FPGA from the Embedded USB Configuration Port R
There is no difference between the embedded Platform Cable USB implementation and the
standalone Platform Cable USB hardware. The host computer operating system and
iMPACT reports the attached cable as the standalone version.
The embedded Platform Cable USB can be designated as the “active” configuration cable
by selecting “Output -> Cable Setup” from the iMPACT tool bar as shown in
Figure A-2 .
Figure A-1: Device Manager Cable Entry
Figure A-2: iMPACT Cable Selection Drop-Down Menu