Digilent 6003-410-000P-KIT - Manual (Page 76)

76 www.xilinx.com XUP Virtex-II Pro Development System
1-800-255-7778 UG069 (v1.0) March 8, 2005
Appendix A: Configuring the FPGA from the Embedded USB Configuration Port R
Any additional files required by the design can specified at this time. Right click on the
Virtex-II Pro FPGA and select “Program” to program the device as shown in
Figure A-8 .
Figure A-7: Assigning a Configuration File to the FPGA
Figure A-8: Programming the FPGA