Digilent 6003-410-000P-KIT - Manual (Page 88)

88 www.xilinx.com Xilinx University Program Virtex-II Pro Development
System
1-800-255-7778 UG069 (v1.0) March 8, 2005
Appendix C: Restoring the Golden FPGA Configuration R
3. Start up iMPACT and select Configure Devices as shown in Figure C-1 .
4. Clock on Next and select the Boundary Scan Mode from the option menu shown in
Figure C-2 .
Figure C-1: Operation Mode Selection: Configure Devices