Figure c-7, Menu as shown in – Digilent 6003-410-000P-KIT User Manual
Page 93
Advertising
Xilinx University Program Virtex-II Pro Development System
93
UG069 (v1.0) March 8, 2005
1-800-255-7778
R
11. The iMPACT software responds with a form that allows the user to specify which
design revisions are to be programmed and the programming options for the various
revisions. Select Design Revision Rev 0 and set the Write Protect (WP) bit to prevent
the user from overwriting the Golden configuration. Verify that the Operating Mode is
set to Slave and the I/O Configuration is set to Parallel Mode as shown in
.
Figure C-7:
Selecting the Program Command
Advertising