EVCO EPU2BXP1S1 - Manual (Page 20)

EVCO S.p.A. c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104
EVCO
page 20 of 68
4. User interface
4.1 Display and keyboard
Both control solutions (compact and complete) use the Vgraph user terminal equipped with LCD graphic display
128x64 pixel and 6 keys. The terminal can be panel mounted (IP 65 with optional gasket) on the unit or remote using
EVCO wall box or in wall recess boxes type “506”. Besides the EVCO front plates it is possible to use BTicino “Living” or
“Light” series plates.
4.1.1 Vgraph interface
The interface is connected via CAN to the controller
The keyboard has 6 keys for page navigation and editing values, with the following meaning:
- UP and DOWN: in editing they modify the parameter values, otherwise they move the cursor. If the DOWN
button is pushed for about 2 seconds the buzzer is silenced.
- LEFT and RIGHT: display of the masks in succession.
- ENTER: in editing it confirms the value, otherwise it sends any control associated to the text where the cursor
is positioned. If an alarm page is being displayed pushing this key for about 2 seconds causes the alarm
reset. If the alarms pages are being displayed a short push moves to the following active alarm.
- ESC: in editing it cancel the modification, otherwise it requests for default page associated to the current
page. If the ESC key is pressed for about 2 seconds the unit is switched on/off.