EVCO EPU2BXP1S1 User Manual
Page 41
EVCO S.p.A.
c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104
EVCO
page 41 of 68
PH80
CAN communication Baud Rate
(20K, 50K, 125K, 500K)
1
1
4
-
CO-V
Notes: The outside air return probes activation parameters, respectively PH41 and PH43 are conditioned by the state
of PG01. If the input confirms the presence of the By-Pass, the two parameters are active, otherwise they are
deactivated. Any changes to the parameters are allowed, but any change in state of the digital input DI5 implies
changes of the two parameters.
Once the machine parameters have been configured and at every modification of the configuration parameters, it is
advised to remove and re-apply the power supply to the board to allow the control to configure itself correctly.