EVCO EPU2BXP1S1 - Manual (Page 45)

EVCO S.p.A. c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104
EVCO
page 45 of 68
6.6 Programming key
It is possible to save the value of all system parameters into the programming key or upload them from the
programming key. By means of this key is therefore possible also to copy the parameters from one device into one or
more compatible ones. The saving or uploading operation can be carried out only with machine OFF, by connecting the
key.
To save a parameter list in the programming key:
- Enter the DEFAULT menu
- Move the cursor on KEY Save: OK and push the ENTER key. The storage of the
parameters into the key will be done
To copy a parameter list from the programming key into the device:
- Enter the DEFAULT menu
- Move the cursor on KEY Upload: OK and push the ENTER key. The storage of the
parameters into the key will be done
-
Note: The information to the product and relevant software version are saved in the key in
order to allow the transfer of parameter maps only between compatible devices