EVCO EPU2BXP1S1 - Manual (Page 21)

EVCO S.p.A. c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104
EVCO
page 21 of 68
4.2 List of pages
This paragraph presents the main pages and menus present in the application. The general menu is divided into three
levels: user, installer and manufacturer, there is also a menu for the management of the system clock and some free
access state pages. The menus have the following structure:
⋅ Main Menu
⋅ User Menu (Level 1, level 1 password)
⋅
Installer Menu (Level 2, level 2 password)
o Clock branch installer menu
o Maintenance branch installer menu
o Fans branch installer menu
o Heating elements branch installer menu
o Free-cooling branch installer menu
o Safety device branch installer menu
o Various device branch installer menu
o Default branch installer menu (level 3, only with unit OFF)
⋅ Manufacturer Menu (Level 3, level 3 password, only with unit OFF)
o Configuration branch manufacturer menu
o Fans branch manufacturer menu
o Heating elements branch manufacturer menu
o Outdoor air damper branch manufacturer menu
o Recovery heat exchanger branch manufacturer menu
o Safety device branch manufacturer menu
o Various branch manufacturer menu
4.2.1 Main Menu
The main menu is the access point for all other system menus.
It is possible to display this menu from any point of the user interface pushing the ENTER key for about 2 seconds.
From this page it is possible to enter the other menu using the UP and DOWN keys and pushing the ENTER key to
confirm. By pushing the ESC key on this page it is possible to go back to the main page of the application.
4.2.2 Password
Each menu has an associated level (except clock and log) with a relevant password for accessing to the various
functions present in that menu. Once the correct password has been entered the protected function can be accessed.
Two effects are obtained by entering a password correctly:
⋅ release of the correlated level
⋅ release of the sub-levels