EVCO EPH4DXP1SA - Manual (Page 29)

EVCO S.p.A. c-pro 3 hecto MCSA | User manual ver. 2.0 | Code 144MCSAE204
page 29 of 52
5.1.3.2 Time period operation mode
The MCSA module makes the possibility to set a weekly automatic time period system, independent for both areas,
available to the final user.
5.1.3.3 Enabling Time periods
To enable the weekly automatic time period system, go to the "Time periods menu" from the Zone Page using the
LEFT and RIGHT navigation keys and take the "Abilita (Enable)" parameter to the SI (YES) value.
Once the time period management has been enabled, the system will automatically go into the following status:
WINTER: ANTI-FREEZE (with system standard safety value set by the system installer).
SUMMER: OFF.
With time periods enabled, a modification of the set from keyboard is maintained in the memory only until period
change or machine switch-off. In fact, in this condition the Manual Set variable is not modified.
5.1.3.4 Setting Timer periods
By entering the "Imposta fasce (Periods setting)" menu, it will be possible to enable automatic system switch-on for
every day of the week and set up to 3 COMFORT periods defined with activation time and duration (parameters
expressed in hours).
In order to facilitate the comprehension and setting, the following page gives a complete example of setting daily time
periods:
Take the cursor onto the day of the week selected and press ENTER. Use the UP and DOWN keys to scroll to the day in
which the time periods are to be set (in this case Monday) and press ENTER again.
After having selected the day of the week to be set, shift the cursor onto the daily enabling box and press ENTER to
take the value to SI (YES) (whenever enabling is at NO, the system will be in the “rest” situation for the entire day,
i.e. in OFF status during the summer season and in ANTI-FREEZE mode during the winter period. Useful setting for the
week-end in the event of industrial installations such as offices, shops etc...). Press ENTER again to confirm.