EVCO EPH4DXP1SA - Manual (Page 30)

EVCO S.p.A. c-pro 3 hecto MCSA | User manual ver. 2.0 | Code 144MCSAE204
page 30 of 52
By moving the cursor onto the successive fields it will be possible to enable up to three daily time periods with
"Comfort" set-point, as follows:
“F1 Mode”: No = period 1 with Economy set-point; Comfort = period 1 with Comfort set-point
“Time”: Time of enabling the relative time period (only logical if set in Comfort mode)
"Duration": Duration of the Comfort time period enabled (only logical if set in Comfort mode)
Once daily setting has ended, take the cursor to the "Salva (Save)" box and press ENTER.
Using the UP key, shift the value of the field from "NO" to "SI" (YES) and press ENTER to save the settings set.
Once saving has been completed, the "SI" (YES) label will automatically return to the "NO" value.
EXAMPLE
With the settings inserted in the previous example screen, the following information will be obtained:
Ore 00:00 - 07:00 Economy
Ore 07:00 - 09:00 Comfort
Ore 09:00 - 10:00 Economy
Ore 10:00 - 12:00 Comfort
Ore 12:00 - 17:00 Economy
Ore 17:00 - 22:00 Comfort
Ore 22:00 - 24:00 Economy
5.1.4 Set-point Menu
The MCSA c-pro system gives the final user the possibility to independently set all weekly automatic time period work
set-points for both zones in a simple and intuitive manner via a unique user screen.
In order to set the time period work set-points, from the user menu go to the sets of the desired zone, the following
screen will appear:
To set the set-points, just position the cursor on the value to be edited and press ENTER.
Use the UP and DOWN keys to set the desired value and then use the ENTER key again to confirm.
The following set-points can be set by the user:
Economy Set-point [I]: Winter Economy work period set-point
Comfort Set-point [I]: Winter Comfort work period set-point
Economy Set-point [E]: Summer Economy work period set-point
Comfort Set-point [E]: Winter Comfort work period set-point
ECO humidity [E+I]: Economy period humidity work set-point (Summer + Winter, with regulation active in Summer
mode only)
COM humidity [E+I]: Comfort period humidity work set-point (Summer + Winter, with regulation active in Summer
mode only)