EVCO EPH4DXP1SA - Manual (Page 8)

EVCO S.p.A. c-pro 3 hecto MCSA | User manual ver. 2.0 | Code 144MCSAE204
page 8 of 52
2.2 Installation
2.2.1 Installation of the c-pro 3 hecto MCSA control module
On DIN guide 35.0 x 7.5 mm (1.377 x 0.295 in) or 35.0 x 15.0 mm (1.377 x 0.590 in).
Operate as indicated in the drawing below to install the devices.
1 2
To remove the devices, first remove any terminal board with extractable screws inserted in the lower part and then
operate on the DIN guide clip using a screwdriver, as indicated in the following drawing.
3 4