EVCO c-pro kilo AHU - Manual (Page 25)

C-PRO KILO AHU APPLICATION MANUAL
Pag. 25
In the REGOLAZIONI (REGULATIONS) Menu you can set/view parameters for various
specific regulations:
⋅
compensation regulation Set Point
⋅
cycles for air quality sensors
Within the VENTILATORI (FAN), BATTERIE (COIL), UMIDITA’(HUMIDITY),
RECUPERO(RECUPERATION), SERRANDA ARIA (AIR SHUTTER) and POMPE (PUMPS)
menus you may set the the related parameters to manage the devices:
⋅
regulation parameters
⋅
timetable
⋅
operation
In the SICUREZZE(SECURITY) Menu you can find all the paramaters which relate to the
alarms and the management of device security:
⋅
enabling
⋅
signal delays
⋅
type of re-arm…
The VARIE(VARIOUS)Menu contains other general parameters:
⋅
maximum threshold values
⋅
Modbus communication
⋅
enabling On/Off of Digital inputs and supervisor
⋅
enabling secondary Set Point of Digital inputs and supervisor
⋅
enabling summer/winter modes from Digital inputs and supervisor
⋅
enabling probes
⋅
digital input/output logistics
⋅
enable nocturnal operating mode
⋅
cancelling history
⋅
unit of measurment
From the DEFAULT Menu it is possible to restore the default values of all the parameters of
the application and save or redownload a map which contains all the parameters from the key.
This Menu is only accessible when the machine is off.
4.2.6 Constructor Menu
The Constructor Menu appears in level 4 and requires a password from a constructor in order
to view/modify the paramaters presented in this branch. In addition, this Menu is only
accessible when the device is off.
The Constructor Menu contains all the parameters relating to the configuration of the device.
By pressing the ENTER key on the text which reads
“MENU’ COSTRUTORE”
(CONSTRUCTOR MENU) you will come to a page allowing you the option to change your
password for all four levels.