EVCO c-pro kilo AHU - Manual (Page 26)

C-PRO KILO AHU APPLICATION MANUAL
Pag. 26
The CONFIGURAZIONE(CONFIGURATION) Menu allows you to set/view the parameters
relating to the characteristics used to configure the device.
⋅
unit type
⋅
coil number
⋅
device enablement
⋅
utilization of the expansion
In the HARDWARE IN Menu you can set the positions of the digital inputs.
In the HARDWARE OUT Menu you can set the positions of the analogue and digital inputs.
4.2.7 Password
Within each menu (excluding the clock and history menus) is an associated level that has
conditional access.
Each level has an associated password which permits access to the
functions within a particular menu. Once the password is typed in, the protected functions
will become accessible to the user. Typing in the correct password will have the following
two effects:
⋅
permits access to the correllated level
⋅
permits access to sub-levels
Each password for each level can be modified from within that level or from a higher level.
For example, all passwords within the constructor level can be modified by levels below the
contructor level.
The following is an example of the password page appearing in the contructor menu:
The range of acceptable values for the password is: -999 / 9999.
If no further action is required in the current page, after a period of 4 minutes, the password
insterted will expire thus requiring a new password to be insterted.
4.2.8 Main OFF page
The main OFF page displays the reason for which the unit is turned off.
When the “Unita’ OFF da alarm” (OFF from alarm) is on, it can be shut down completely by
using either the keys, digital inputs or supervisor.