User management – FingerTec DiGiTime (OEM) User Manual
Page 16
15
User Management
Click
to go to User Management.
Click “User management” to open the page and you
will see the following window.
User Fingerprint Management is a page to interact
with all connected terminals in handling transfers
of users. The details of each column are explained
below.
User ID:
The number to identify every user enrolled in a terminal, maximum ID is 9 digits.
Name:
The full name of every users for example Tony Michael.
Department:
The department that the user belongs to.
Fingerprint:
Total fingerprint templates user enrolled in the terminal
User Name:
The display name on the terminal during verification, maximum is 8 characters.
For example Tony.
Privilege:
The system offers 4 levels of authority to the terminal. • User – Normal user who is
not given any permission to access any settings of a terminal. • Enroller – A person who is given
permission to only enroll new users into a terminal. • Admin – A person who is allowed to access
all settings of a terminal except Advance Settings. • Supervisor – A person who has the highest
authority to access all settings in a terminal.
Password:
The password enrolled at the terminal. Current password can be edited or it can be
replaced with a totally new password. A user can also add a password to the User ID to enhance
security. However, any changes made must be uploaded to select terminal(s) before it could
take effect. Ignore this step if a user is not using any password.
Card ID:
The Card ID enrolled at the terminal. Current card can be edited or it can be replaced
with a totally new card. A user can also add a card to the User ID to enhance security. However,
any changes made must be uploaded to select terminals before it could take effect. Ignore this
step if a user is not using any card.
Disabled:
This function is to disallow certain users from getting verification at certain
terminal(s).