FingerTec DiGiTime (OEM) - Manual (Page 74)

73 CONTENTS
Step 7: A new window will pop up. Click “Apply” to start updating the settings.
Step 8: Click “Close” to end process. Repeat Step 6 to 8 to upload settings to other terminals.
Remember to select the correct terminal ID before updating it.
Step 9: Click “Close” to end the process.
GROUP USERS INTO ACCESS CODE WITH DIFFERENT
VERIFICATION METHOD
Step 1: Click to open User Access Code.
Step 2: Select Access Code as configured in Terminal User Control, for example, Access
Code 2.