FingerTec DiGiTime (OEM) - Manual (Page 23)

22 CONTENTS
Setting Terminal Date and Time
When you run the software for the first time, synchronization of date and time of terminals with
the computer is crucial.
[1] Click and select
“Set terminal date and
time”.
[2] The date and time of the
terminals must always
be the same as the
computer’s.
[3] Click “Apply” to synchro-
nize with the terminal.
If you noticed that the date
and time of any terminals
are not the same as the
time in the computer which
collects all the data, please
follow the steps above to
synchronize.
Ignore this step if the date and time of terminals are in sync with the date and time of the
computer.
Downloading Data from Terminals
Users verify their fingerprints, passwords or cards at a terminal to report attendance or gain ac-
cess. The date and time of verification is captured as clocking data and saved into local memo-
ry of terminals. To enable viewing of these clocking data, the data needs to be downloaded into
the software to generate attendance data, in-out records and reports. It can be done manually
or automatically. Failure to download data from terminals to computer, no records could be
viewed in the software.
MANUAL DOWNLOADS
[1] Click and select
“Download data from
terminals”
[2] Click “Apply” to start
downloading process.
[3] If you are connecting
to multiple terminals, a
new window will pop up
after you clicked Apply.