FingerTec DiGiTime (OEM) - Manual (Page 85)

84 CONTENTS
Step 3: Click to select the drive of USB pen drive, for example: G. Click “From USB” to start
reading users from the USB pen drive.
Step 4: You can select users to download by checking the column next to the User ID, and
you can also select “All” to download. Click “Save to PC” to download users into the soft-
ware.
UPLOADING USERS THROUGH USB PEN DRIVE
You can copy users into a USB pen drive and upload them to any terminals. To do this, follow
the steps below.
Step 1: Click to open USB Pen Drive Management.
Step 2: Click “Write user into an USB disk to be uploaded into remote terminal”. Click “Next”
to continue.