FingerTec DiGiTime (OEM) - Manual (Page 9)

8 CONTENTS
Step 4: Software will be acti-
vated. Click “OK” to accept the
message. If “Apply” button is
deactivated after insertion of Ac-
tivation Key. Make sure the key
numbers shown on the screen are
the same as the ones printed on
the sticker.
Adding or Deleting Terminals
ADDING NEW TERMINALS INTO THE SOFTWARE
Step 1: Click “Add” to add a new terminal into the software.
Step 2: Insert the Software Product Key. Click the “key” icon to confirm.
Step 3: Repeat steps as mentioned in page 16.